Mini-MAG XM is capable of cutting 6" (153mm) pipes and larger from the outside, and 24" (610mm) pipes and larger from the inside and may be used for welding applications as well.
Mini-MAG XM has all of the outstanding features of the MagnaCut XM except for the Electronic Torch Arm. The Mini-MAG is designed for pipes having a wall thickness from .250” to 3” (6.4mm to 76mm) with coatings up to 0.015" (.4mm) thick. The machine will cut 16" (406mm) pipes and larger parallel to the pipe centerline.The Mini-MAG magnets hold the machine to the material with 300lbs (136kg) of magnetic force. The cutting torch of the Mini-MAG XM moves backward and forward by means of a manually rotated rack with knob, and is capable of cutting both horizontal and vertical pipe and plate. The Mini-MAG is equipped with guide rollers for use with 1" x 1" x 1/8" (25mm x 25mm x 3mm) angle iron or the MagnaCut XM Guide Strip for vertical cutting. A guide strip is recommended when using the Mini-MAG XM to cut pipes 18" (457mm) and larger to improve cutting accuracy.
Welding with the Mini-MAG XM
Many companies have gained a decisive advantage by using the Mini-MAG XM as a tractor with a machine welding torch for long tedious horizontal stringer welds. The machine is available with a rack adjustable torch holder for a machine torch or a metric torch rack. The Mini-MAG can propel the welding torch at speeds from 2" to 40" (51mm to 1016mm) per minute depending on the welding source, gas mixture, and deposition rate.
Torch Shut-off Valve
The Torch Shut-Off Valve gives the operator the ability to shut-off the flow of oxygen and fuel to the cutting torch, without disturbing the oxygen and fuel settings, with only a flip of the switch.
1.) The MiniMag XM should not be used on heavy wall pipe or plate thicker than 3" (76mm).
2.) The MiniMag XM is not designed for use with 1 3/4" (44mm) or 2 ½" (64mm) barrel Plasma torches.
3.) ALWAYS SECURE the machine to the pipe with a safety strap.
4.) MIT should be contacted prior to attempting any application not listed in the catalog.
5.) MagnaCut XM is not designed for cutting spiral welded pipe.
6.) Persons wearing a pacemaker should not come in contact with this equipment.
• Bevels plate and pipe at angles to 45º
• Minimum set up time, just strap on and begin cutting!
• Can be used with oxy/fuel or plasma machine torches having a 1 3/8" (35mm) barrel diameter
• Eliminates the need for more than one machine for different pipe and plate sizes
NOTE: The Mini-MAG XM is equipped with guides that can be used with 1" X 1" X 1/8" (125mm x 125mm x 3mm) angle iron for vertical (up or down) welding applications.
• Base Machine
• Motor Control Box
• Torch Arm
• Sliding Support
• Torch Holder
• 74" / 1880mm long Safety Cable for pipe diameters up to 24" / 610mm pipe
• Two (2) Snap Hooks
• Standard Mathey Dearman Motor Control Box
• Parts and Operating Manual
*Cutting Torch is not included