Mathey Dearman's revolutionary MagnaCut XM enables the welder and pipefitter to cut, bevel, and even weld steel pipe and steel plate without having to secure the machine to the work surface by means of chains, clamps, or any other device.
The MagnaCut XM is an excellent choice when cutting a variety of sizes and thicknesses of pipe and plate, cutting materials with wall thicknesses from .280” (7mm) to 3" (76mm). In addition, the remotely-operated motor control box allows the machine to cut in hard-to-reach locations such as overhead pipes and vertical walls. Even on pipe or plate with coating material up to .015 (.4mm) thick, the MagnaCut XM tracks straight, and the torch-to-work surface distance is held constant. The secret is in the MagnaCut’s magnetic wheels that secure the machine to the surface with 300lbs of pull. Inside the wheels are rare-earth magnets, the strongest permanent magnets made.
When it comes to welding with the MagnaCut XM, many companies have gained a decisive advantage by using the MagnaCut as a tractor for a machine welding torch for long tedious horizontal stringer welds. The MagnaCut can propel the welding torch at speeds from 2" to 40" (51mm to 1016mm) per minute depending on the welding source, gas mixture, and deposition rate. The machine is available with a rack adjustable torch holder for a 1 3/8 inch (35mm) machine torch with 32 pitch or a metric torch rack.
- Minimal set up time.
- Cuts pipe, plate, walls and overheads.
- Speed and direction of both machine and torch arm speed are remotely controlled.
- Strong magnets hold fast to any receptive surface with coating up to .015" (.4mm) thick.
- Up to 80% faster than cutting by hand.
- Base Machine.
- Motor Control Box.
- Electric Torch Arm.
- Torch Holder.
- Torch Support.
- Hose Support.
- 74inches / 1880mm long Safety Strap for up to 24 inches / 610mm pipe.
- Two (2) Snap Hooks.
- Protective Leather Cable Sleeve.
- Service Keys.
- Storage Box.
- Parts and Operating Manual.
*Machine cutting torch not included